NeXT Computers

NeXT Computer, Inc. => New Technology => Topic started by: wayne123 on May 15, 2017, 08:14:33 pm

Title: SCSI2SD mount for color slab
Post by: wayne123 on May 15, 2017, 08:14:33 pm
I made a 3d printed mount for the SCSI2SD V5 adapter for my color slab.
If anyone is interested, here is the thingiverse llink.
http://www.thingiverse.com/thing:2322232
Title: SCSI2SD mount for color slab
Post by: drakar on May 15, 2017, 08:34:17 pm
Very cool, thanks for sharing!
Title: SCSI2SD mount for color slab
Post by: Waltermixxx on March 23, 2018, 06:11:26 pm
nice, will this work with a mono non turbo next station? (Mono Slab?)

:) please advise.
Title: SCSI2SD mount for color slab
Post by: wayne123 on March 24, 2018, 03:28:58 am
I don't know if there is a different mount in the mono slab vs. the color slab, I would think the hard drive mounting plate would be the same but I don't have one to check.

I do know that the SCSI2SD board I have in my Amiga is different than the one in my NeXT computer, it has a Molex connector next to the ribbon cable, it covers the spot where I put a screw on the SCSI2SD board in my NeXT.