NeXT Sound Card mounted in Cube Back Filler plate

Started by Rob Blessin Black Hole, March 06, 2018, 11:24:44 pm

Previous topic - Next topic

Rob Blessin Black Hole

Hello NeXT Community: We are tinkering with a prototype of moving the soundcard inside the Cube , prototype 1

 
and yes we will mount speaker and microphone and leave room for the dimension board! I think we should be able to do pass through VGA Video mount on modded board
or just our custom VGA Y cable for use with flatpanel .  
Also using Brians Megaload board for Model 152 power supplies.  
Best Regards Rob Blessin
Rob Blessin President computerpowwow ebay  sales@blackholeinc.com http://www.blackholeinc.com
303-741-9998 Serving the NeXT Community  since 2/9/93

barcher174

Hi Rob,

Looks good. Are you making new card covers or modifying existing ones? Also no need to mount the VGA to the board. You could just use a panel mount style connector.

Rob Blessin Black Hole

We used the existing fillers , however hey must be stainless steel because they were difficult to Dremmel.   I think a custom 3d printed filler plate or entire back might be cool as well. As I have a few Cube Shells missing front and back plates.  I want to try out the 3d scanner we have and see how well it works. I want to make some Cube Feet and 4000 Feet ..... more fun projects.
Rob Blessin President computerpowwow ebay  sales@blackholeinc.com http://www.blackholeinc.com
303-741-9998 Serving the NeXT Community  since 2/9/93