Started by krazycat, May 28, 2019, 09:40:19 pm
Quote from: barcher174 on May 29, 2019, 12:38:41 amIf the SD card is larger than the xml i don't think you should see issues. What kind of errors are you seeing?
Quote from: wa2flq on May 29, 2019, 06:21:43 pmCan you share a little more about how you are using the SCSI2SD
Quote from: krazycat on June 02, 2019, 07:03:23 pmHi all, today I did a series of tests on the SCSI2SD v5.1 card. See pics for the configuration I used. Unfortunately the card doesn't work, I always get the error message "sc: parity error". -I tried the 16 GB SDcard (previously created for this SCSI card) on an old SCSI2SD v5.0 and it starts up correctly. -I tried a known work 8 GB SDcard on this SCSI2SD v5.1 and it doesn't start. -I tried with and without power cord plugged on SCSI2SD, not working. -I tried with a different SCSI cable, no luck again. -I tried activating the parity preference, but the error is always the same, "sc: parity error". I'm losing hope with this card, someone have any other advice for me? :'(
Quote from: wa2flq on June 03, 2019, 01:31:02 amTwo additional items. 1) You don't appear to have the latest utility program that has some features, especially termination control, that are intended for the V5.1. (see below)2) I'll will again suggest that you flash the firmware to the latest version.