NextStep 3.3 on 040 Cube won't shut down

Started by elemenoh, March 14, 2019, 12:27:30 am

Previous topic - Next topic

elemenoh

I tried removing the active termination jumpers and just got a SCSI bus error on boot.

I noticed that if I don't log in, I can restart or shutdown from the login screen okay. Restart/Shutdown from the login screen takes ~20 seconds.

I checked my config again and it seems inline with what others have said works ok.

I am powering via the molex connector, but that seems fine too. It's not like I suddenly lose power or have other unexpected errors. It's only when I go to shut down. I'll try powering it via USB instead for the heck of it though. IIRC, Joey's *is*powered via USB.

Any other suggestions?