Started by mattsoft, November 30, 2019, 07:12:53 pm
Quote from: barcher174 on November 30, 2019, 08:54:24 pmThe startup sequence sounds correct. The LED will flash and then turn off in normal operation. If it starts flashing repeating patterns then there is a hardware fault. You are correct, the color stations need SoG. I would suspect the monitor or the cable based on your description.
Quote from: barcher174 on December 01, 2019, 12:02:40 amNow you have a memory error. Exception codes here: http://www.asterontech.com/Asterontech/NeXT_POST_Codes.html