NeXT Computers Forum Index NeXT Computers
www.NeXTComputers.org
 
Log in to check your private messagesLog in to check your private messages

Log inLog in  RegisterRegister


Profile  Search  Memberlist  FAQ  Usergroups
Anyone Familiar With HP 9000 735?

 
Post new topic   Reply to topic    NeXT Computers Forum Index -> Sun / HPPA Hardware
View previous topic :: View next topic  
Author Message
pan1k



Joined: 17 May 2007
Posts: 91
Location: Los Angeles, CA

PostPosted: Fri Mar 02, 2012 1:51 pm    Post subject: Anyone Familiar With HP 9000 735? Reply with quote

I have an HP 735, it has the Fast and Wide SCSI option, which isn't recognized by NS 3.3. It has the module tho that houses the SCSI drives, and the connector on the module is SCSI 3. Will it work if I get a SCSI 3 -> SCSI 2 cable and patch it into the SCSI 2 Single Ended port on the main logic board? I have the internal drive pinned as ID6 and the CDROM as ID2. I bent a pin on the cable so I will have to wait a bit to see if it will work..
Back to top
View user's profile Send private message
Noth



Joined: 04 Apr 2008
Posts: 146
Location: Lausanne, Switzerland

PostPosted: Sat Mar 03, 2012 1:28 pm    Post subject: Reply with quote

I'd try the nekochan forum, they're much more versed in HP gear and scsi. HP 9000 hw was hardly the typical NeXT OS setup and us hobbyists usually do x86 or sparc.
_________________
NeXT Cube 040 (NeXTSTEP 3.3), SUN SparcStation5 (NeXTSTEP 3.3), SGI Indigo2 R10000 (IRIX 6.5.22), SGI VSW320 (Windows 2000/Slakware 9.1)
Back to top
View user's profile Send private message
pan1k



Joined: 17 May 2007
Posts: 91
Location: Los Angeles, CA

PostPosted: Wed Mar 07, 2012 9:35 am    Post subject: Reply with quote

Well, No luck. I had the drive pinned as ID6, I dried SE mode, no dice. I purchased an external 9gb SCSI drive from eBay, will try that next week. Getting closer though!!!
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    NeXT Computers Forum Index -> Sun / HPPA Hardware All times are GMT - 7 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Powered by phpBB © 2017 phpBB Group