View previous topic :: View next topic |
Author |
Message |
wayne123
Joined: 13 Feb 2017 Posts: 15
|
Posted: Mon May 15, 2017 1:14 pm Post subject: SCSI2SD mount for color slab |
|
|
I made a 3d printed mount for the SCSI2SD V5 adapter for my color slab.
If anyone is interested, here is the thingiverse llink.
http://www.thingiverse.com/thing:2322232 |
|
Back to top |
|
 |
drakar
Joined: 23 Sep 2016 Posts: 17
|
Posted: Mon May 15, 2017 1:34 pm Post subject: |
|
|
Very cool, thanks for sharing! |
|
Back to top |
|
 |
Waltermixxx
Joined: 24 Feb 2018 Posts: 7 Location: Toronto
|
Posted: Fri Mar 23, 2018 11:11 am Post subject: |
|
|
nice, will this work with a mono non turbo next station? (Mono Slab?)
please advise. |
|
Back to top |
|
 |
wayne123
Joined: 13 Feb 2017 Posts: 15
|
Posted: Fri Mar 23, 2018 8:28 pm Post subject: |
|
|
I don't know if there is a different mount in the mono slab vs. the color slab, I would think the hard drive mounting plate would be the same but I don't have one to check.
I do know that the SCSI2SD board I have in my Amiga is different than the one in my NeXT computer, it has a Molex connector next to the ribbon cable, it covers the spot where I put a screw on the SCSI2SD board in my NeXT. |
|
Back to top |
|
 |
|